Identify keg
Enter outside diameter and height, read off design, capacity and tare weight. Plus the matching spear.
OpenBuying, renting or refurbishing
Costs per keg and year, per fill, break-even and tied-up capital in three scenarios – with researched market prices as starting values.
OpenKeg Explorer
A DIN keg in 3D – rotate it, break it down into components, cut it open. Every part with its function and wear pattern.
OpenKeg condition and residual value
Enter design, year of manufacture and visible defects – findings, when the spear overhaul is due and the range between scrap value and market value.
OpenDoes your keg pay for itself?
Cycles, return rate and distribution distance against the published break-even points – with no invented CO₂ figures.
OpenSpear length and weight
The tube below the sealing edge, the total length and the weight from H3 and spear type – with a scale sectional sketch.
OpenKegs per pallet
Layers, stacking height, weight and articulated lorry utilisation for every design – drawn to scale.
OpenHow much is still in the keg?
Enter the weighed total weight, select the design – remaining quantity, fill level and number of glasses. With the stored tare weights of all designs.
OpenDispense pressure and carbonation
Saturation pressure from temperature and CO2 content, plus line resistance and delivery head – with the limit at which the system is wrongly dimensioned.
OpenHow many kegs do I need?
Fleet size from sales volume, cycle time, seasonal peak and reserve – and a note on which of the four figures really decides it.
OpenFoam troubleshooting
Six symptoms at the tap, sorted by frequency – with the check that confirms or rules out each cause in minutes.
OpenKeg cleaning in section
Fifteen steps through the cleaning plant, followed in a sectional view – with media, temperatures and limits.
Open