Home›Kegs
Buy kegs
New, reconditioned or from overproduction – in all common designs, with the spear that suits your system. From our own warehouses in Germany and Poland.
By condition
The condition determines price and availability – not suitability. A reconditioned keg meets the same requirements as a new one.
Brand-new
New kegs
First fill, full manufacturer warranty, free choice of design, capacity and spear. The route for building up a new fleet.
Go to the new kegsTested · lowest-cost route
Reconditioned kegs
Cleaned, pressure-tested, with new wear parts and a warranty. Technically equivalent, considerably cheaper – and available immediately.
Go to the reconditioned kegsClearance stock
Overproduction
Brand-new kegs from discontinued series or overproduction. Changing stocks, usually in larger lots. On request.
Ask about stockSmall quantities go straight through the shop
Single kegs and small lots need no detour – put them in the EU Sankey (S-type). For larger quantities please send an enquiry; we then work out the scale price, availability and freight for your exact quantity. Anything that departs from the standard goes through the enquiry as well: colour rings, your own marking, a particular laser engraving.
Spears and spare parts are stock items. The shop carries them from the single box up to pallet quantity, with a price scale.
Warranty on used and reconditioned kegs
Business buyers receive a 12-month warranty from delivery. Wear parts such as seals are excluded. Consumers are covered by the statutory two-year period.
The housing seal is a single-use part. It is destroyed when the spear is removed and refitted, so it is replaced every time a spear is changed – please do not reuse it.
By design
You can read the shape off the outside diameter and the volume off the height. If you are unsure, the keg identifier gets you there in two entries.
Ø 363 mm
DIN keg
The slimmer German standard, 363 millimetres in outside diameter. Taller than the EURO keg at the same capacity and therefore more space-saving when palletised.
Dimensions and versionsØ 395 mm
EURO keg
The European standard, 395 millimetres in outside diameter, stackable, with the widest range of spare parts and the best market acceptance.
Dimensions and versionsØ 237 to 309 mm
SLIM keg
Slim designs for tight cold rooms and smaller dispense volumes. Popular with craft breweries – with one limitation for summer export.
Dimensions and versionsWhich spear do you need?
The spear decides whether your coupler fits – and it is not an accessory but a safety-relevant component. The first look goes to the neck: if a body sits on top of it, it is a flat (A-type), triangular (G-type) or combi spear (M-type); if the body sits inside the thread, it is a EU Sankey (S-type) or US Sankey spear (D-type). The callipers settle the rest in seconds – 74.5 mm means flat (A-type) or combi, 70 mm means triangular.
The full overview, with a compatibility matrix covering 64 brands, is available from our sister company: keg spears.
